HOME OUR COMPANYSpring TillageFall Tillage LOCATION/CONTACT

Flex-Till Features

Do you want more from your ripper?  By bolting on a Flex-Till rolling basket to your machine you can get the same results as a new machine for just a fraction of the cost.

Our aggressive design features a spiraled blade basket that is design to size down the clumps, pin down the residue and throw dirt on top. This leaves a smoother soil profile with less visible residue. All of this will promotes decay and will make for a better seed bed.

Seed bed conditions are the last critical factor to affect crop yield. Plants that get off to a quick and healthy start have the best chance for maximum yield potential.

Flex-Till Rolling Baskets for:

  • Case/IH DMI
  • John Deere
  • Wil-Rich Soil Pro

Case IH / DMI Rippers

 

Kits available for the following models:

527 • 530 • 730 • 2500 • 9300                    

Specifications

  • 16” diameter spiraled blade baskets for ultimate performance.
  • 6 beveled edge high carbon blades for long life.
  • No center shaft. This reduces any plugging issues.
  • Triple lip sealed, greaseable Ag bearings.
  • Bolts on to existing toolbar
  •  All 530 and the 730C models can retain the disc levelers and bolt-on basket behind them.  All others models must remove disc levelers and bolt on baskets in place of them.

John Deere Rippers

 

 

 

Specifications

  • 16” diameter spiraled blade baskets for ultimate performance.
  • 6 beveled edge high carbon blades for long life.
  • No center shaft. This reduces any plugging issues.
  • Triple lip sealed, greaseable Ag bearings.
  • Baskets height can be adjusted independent from disc levelers.

John Deere 2700 Rippers

  • Active hydraulics installed to allow leveler to adjust to terrain.
  • Kits include all hardware and hydraulics needed to install.
  • 5 shank – 30” and 7 shank -24” machines need stiffener plates weld-on to strengthen parallel arms.
  • Some kits require stubs to be welded on to leveler.

Kits available for the following models:

5 shank – 30” spacing
7 shank – 24” spacing
7 shank – 30” spacing
7 shank – 30” spacing Folding (Currently only factory installed)
9 shank – 24” spacing
9 shank – 24” spacing Folding (Currently only factory installed)

John Deere 510 and 512 Rippers

  • A set of parallel arms are attached to the main frame and move the baskets to desired depth.
  • Kits include all hardware and hydraulics needed to install.
  • 100% Bolt-on

Kits available for the following models:

5 Shank  - Rigid
7 shank  - Rigid
No kits are currently available for folding machines, but coming soon. Please call and check.

 

Wil-Rich Soil Pro 513

 

Specifications

  • 16” diameter spiraled blade baskets for ultimate performance.
  • 6 beveled edge high carbon blades for long life.
  • No center shaft. This reduces any plugging issues.
  • Triple lip sealed, greaseable Ag bearings.
  • A set of parallel arms are attached to the main frame and move the baskets to desired depth.
  • Kits include all hardware and hydraulics needed to install.
  • 100% Bolt-on
  • Active hydraulics installed to allow leveler to adjust to terrain.